How to Fix a Surface Pro Not Charging?

There are several different ways that a Surface Pro won't charge. Typically, the Surface Pro's battery will deplete during use to the point where it shuts down and cannot be turned back on, and the LED status that indicates the power availability will either flash or remain dark.

Why is a Surface Pro not Charging?

The power supply is always one of the most frequent reasons why a Surface Pro won't charge. One of three things could be wrong: the power supply, the connector, or improper connector seating.

How to Fix a Surface Pro That Isn't Charging

Examine the power supply and demand, try various charging strips or power sources, and disinfect any dirty components on a Surface Pro in order to get it to charge. In rarer cases, you might need to replace a faulty or outdated driver or modify the settings for your Surface Pro battery. Follow the below-mentioned steps when your Surface Pro Not Charging.

Utilize the following troubleshooting steps to get your Surface Pro to start charging once more:

Step 1. Verify your Surface charger's LED light. If the illumination is not on, then it is also not receiving power. To check for authority where your Surface is plugged in, first, run a lamp test. Try plugging it into a different outlet if there is no power and see if the lighting turns on. Make sure the electrical strip is turned on, then try another one or plug immediately into an outlet if you're using one.

Step 2. Verify that your surface charger's USB port is powered. Try putting in a device if the Surface Pro 3 charging has a USB port. The charger is defective if the device won't turn on or charge.

Step 3. For damage, inspect the power cable. The Surface Pro charger may not work properly if the wiring is frayed or otherwise damaged. It could also pose a fire risk. See if the issue is resolved by switching out the charger.

Step 4. Examine the charger liaisons for blemishes. There are two ways you can insert the Surface Pro's distinctive flat magnetic charger connector. While some have connectors in a row, others have a straight board with interfaces on both sides.

Step 5. Restart the power source. Remove any USB devices you may have hooked into the Surface Pro's USB port, unplug your computer from the power source, and then wait for no less than 10 seconds. Check to see if it continues to function after plugging it back in.

Step 6. Alternatively, plug in the charger. There are two ways to install the charger connector for the Surface Pro. Flip it over and connect it once more the reverse way after unplugging it first. If it demands with the connector be turned around, there might be dirty interactions on the connector or in the charging port on your Surface Pro.

Step 7. Check the settings for your charging. To increase battery life, Windows 10 offers a setting that allows you to recharge your battery below 100%.

Step 8. Shut down your Surface Pro. Do not put the computer in rest or hibernation mode, as well as disconnect the electrical supply after a complete shutdown. Then, plug it right back in and return it after turning it off for no less than ten seconds.

Execute Windows Update. This issue might arise from a corrupted or outdated battery driver. Make sure Windows Update has updated you completely before doing anything else. Hope, above mentioned steps, will help you when your Surface Pro Not Charging.