How to Fix SimpliSafe Doorbell Camera Not Working Issue?

SimpliSafe doorbell camera not working will definitely be indicated by the blinking of LED in red or by the disabling of the LED that can be fixed by a two-way approach beginning with switching off your SimpliSafe doorbell and removing the same off the wall.

This is to be followed by winding the doorbell wires and bolting the mounting bracket onto the wall going forward. And, what finally remains to be done at this juncture is switching on the doorbell at the circuit breaker and setting up the doorbell along with syncing the same with the Wi-Fi to accomplish the proceedings to fix SimpliSafe doorbell camera not working issue.

Simplisafe video doorbell is a made by Simplisafe (A home security company) for home protection both from indoor and outdoor perimeters. With the help of a doorbell camera to monitor and protect your vicinity is the bold step toward good security and protection. The status LED will blink red if the SimpliSafe Doorbell Camera is not working issue.

Below we will also discuss the different LED lights and what it indicates to fix SimpliSafe Doorbell camera not working issue. In case it is not blinking at all, take a look if the mounting plate has good contact with the gold pins on the doorbell.

Ensure that the mounting plate is not extremely tight that it is bending, preventing good contact with the gold pins. In case the status LED light is flashing red, then you have to check if your wireless router is plugged in and is within the range of the camera.

Moreover, remember to check that your WiFi network is transmitting over 2.4ghz and not only 5ghz. If your Cisco doorbell camera is not working then you should check your Cisco doorbell camera is connected to wifi. It is one of the main reasons behind this issue. To fix SimpliSafe Doorbell Camera not working issue. 

Follow the Steps Mentioned Below to Fix SimpliSafe Doorbell Camera Not Connecting to WiFi.

• SimpliSafe Doorbell Camera Blinking Solid Yellow - Restart or update installation.
• SimpliSafe Doorbell Camera Blinking White - Completely ready for set up.
• SimpliSafe Doorbell Camera Solid White - A trying to connect to the WiFi.
• SimpliSafe Doorbell Camera Blinking Yellow - Linked to the internet, but not linked to SimpliSafe’s servers (can occur after a reboot).
• SimpliSafe Doorbell Camera Blinking Red - Not able to connect to the WiFi.
• SimpliSafe Doorbell Camera Blinking Solid Blue - Connected and shutter open, ready to record or stream.
• SimpliSafe Doorbell Camera Flashing Blue - Currently being viewed live, or a video recording is taking place.
• SimpliSafe Doorbell Camera Off (No Visible LED) - The privacy shutter is closed or the LED has been disabled in settings.

Let’s Also Discuss the Installation Guide of Your SimpliSafe Video Doorbell:

Step 1: Do the power off to your SimpliSafe doorbell at the circuit breaker.

Step 2: Next remove your existing doorbell.

Step 3: Now by the center of the mounting bracket, wind the doorbell wires.

Step 4: Bolt the mounting bracket to the wall.

Step 5: Connect the mounting bracket to the wires.

Step 6: And then push your doorbell into place.

Step 7: Switch the power on to your doorbell at the circuit breaker.

Step 8: Press the doorbell to examine the chime connection.

Step 9: Time to set up WiFi on SimpliSafe Doorbell camera.

Step 10: Lastly, secure the doorbell using mini screwdrivers at the bottom of your doorbell.

Step 11: In case you are installing your SimpliSafe doorbell on a stone or brick or any other concrete surface, then firstly drill holes and then insert the wall anchors.

We hope the above post helped you to not only fix SimpliSafe Doorbell camera not working issue but also the guide to install SimpliSafe Doorbell camera.