How to Install and Pair the Kangaroo Doorbell Camera?

To install and pair the kangaroo doorbell camera can be set up as quickly as peeling and sticking! No tools are needed for setup, but if you want to mount your doorbell with screws, we have those too.

It is a good idea to take notice of the motion detection view and distance before placing the doorbell camera. Your doorbell camera can see 35° left and right and up to 16 feet away. This implies that your phone will receive a notification if there is any movement in this area.

Using The Peel & Stick Method of Installation, Which Requires No Tools:

Step 1: The doorbell should be installed in the middle of your door, about 3'9" and 4'7" above the ground. Ensure the doorbell is not placed over a metal surface while choosing a location.

Step 2: Set the metal surface of your door to the side of the door if it has one.

Step 3: Peel the sticker from the doorbell's back and place it in the desired location for the doorbell. Continually mount the piece if you are satisfied with the placement.

Step 4: To adhere the glue to the surface, firmly press for 30 seconds.

Using the Peel & Stick Method of Installation, Which Requires No Tools:

The doorbell should be installed in the middle of your door, approximately 3'9" and 4'7" above the ground. Check that the doorbell is not placed over a metal surface while choosing a location. Place the metal surface of your door to the side of the door if it has one.

Step 1: Open the doorbell from the bottom and pop off the front portion.

Step 2: Use the two provided screws to attach the backplate to the surface.

Step 3: Replace the front cover with a snap.