How to Reset Swann Security Camera Password?

The reset code on new recorders is obtained primarily through the use of client software on a computer. Other methods exist, but they typically necessitate a higher level of networking knowledge than we anticipate customers will require to operate their system. The reset code is a unique 12-character string generated by the device's unique hardware identifier, known as the MAC address.

To find your recorder's reset code, connect it to your router (if you haven't already) and install and run the software on your computer connected to the same router.

If you have lost or managed to forget your Swann DVR password, simply follow the steps outlined below to reset it. We'll use a master reset password, which is technically the Mac address of the Swann DVR. You can use a smartphone or a computer to complete the steps sequentially. Reset Swann Security Camera Password.

Swann factory reset procedures are applicable to the following models: 4350, 4500, 4900, 8050, and 8075. After the DVR has been reset, you can choose a new password.

How to Reset a Swann DVR's Password

Method 1: Use the SADP Tool to Find the Master Code.

Ensure that the DVR cables are properly connected. The DVR and the laptop/computer must be connected to the same network and router. Check out the diagram below.

Method 2: Use a Phone App to Look up the Code.

To use this method, your phone must be connected to the Wi-Fi from the router to which the Swann DVR is connected.

Method 3: Use a Computer to Locate the Code.

In this case, you will use your computer or laptop to determine the Mac address. Your DVR and computer, like in the other methods, must be connected to the same network.

Conclusion

After finishing this article, you will know how to reset the password of a Swann security system using four different methods; all you need to do is choose which method you prefer, find the simplest way, and solve your password problem.